Symetrix Modular ARC User Manual download pdf

G The lightning ﬂash with arrowhead

symbol within an equilateral triangle is

intended to alert the user of the presence

of uninsulated “dangerous voltage” within

the product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk of

electric shock to persons. The exclamation

point within an equilateral triangle is

intended to alert the user of the presence

of important operating and maintenance

(servicing) instructions in the literature

accompanying the product (i.e. this Quick

Start Guide).

G CAUTION: To prevent electric shock, do

not use the polarized plug supplied with the

device with any extension cord, receptacle,

or other outlet unless the prongs can be

fully inserted.

G Power Source: This Symetrix hardware

uses a universal input supply that

automatically adjusts to the applied

voltage. Ensure that your AC mains voltage

is somewhere between 100-240 VAC,

50-60 Hz. Use only the power cord and

connector speciﬁed for the product and

your operating locale. A protective ground

connection, by way of the grounding

conductor in the power cord, is essential

for safe operation. The appliance inlet and

coupler shall remain readily operable once

the apparatus has been installed.

G User Serviceable Parts: There are no

user serviceable parts inside this Symetrix

product. In case of failure, customers

inside the U.S. should refer all servicing to

the Symetrix factory. Customers outside

the U.S. should refer all servicing to an

authorized Symetrix distributor. Distributor

contact information is available online at:

http://www.symetrix.co.

AVIS:

NE PAS OUVRIR

Il ne se trouve a l’interieur aucune piece pourvant entre reparée l’usager.

SEE OWNERS MANUAL. VOIR CAHIER D’INSTRUCTIONS.

S’adresser a un reparateur compétent.

RISQUE DE CHOC ELECTRIQUE

No user serviceable parts inside. Refer servicing to qualied service personnel.

CAUTION

WARNING:

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK DO NOT EXPOSE

THIS EQUIPMENT TO RAIN OR MOISTURE

DO NOT OPEN

RISK OF ELECTRIC SHOCK

Important Safety Instructions

! Read these instructions.

@ Keep these instructions.

# Heed all warnings.

$ Follow all instructions.

% Do not use this apparatus near water. This

apparatus shall not be exposed to dripping

or splashing and no objects ﬁlled with

liquids, such as vases, shall be placed on

the apparatus.

^ Clean only with dry cloth.

& Do not block any ventilation openings.

Install only in accordance with the

manufacturer’s instructions.

* Do not install near any heat sources such

as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers) that

produce heat.

( This apparatus shall be connected to

a mains socket outlet with a protective

earthing connection. Do not defeat

the safety purpose of the polarized or

grounding-type plug. A polarized plug has

two blades with one wider than the other.

A grounding type plug has two blades and

a third grounding prong. The wide blade

or the third prong are provided for your

safety. If the provided plug does not ﬁt

into your outlet, consult an electrician for

replacement of the obsolete outlet.

BL Protect the power cord from being walked

on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

BM Only use attachments/accessories

speciﬁed by the manufacturer.

BN Use only with the cart, stand, tripod,

bracket, or table speciﬁed by

the manufacturer, or sold with

the apparatus. When a cart

is used, use caution when

moving the cart/apparatus

combination to avoid injury from tip-over.

BO Unplug this apparatus during lightning

storms or when unused for long periods of

time.

BP Refer all servicing to qualiﬁed service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug cord

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or has

been dropped.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Modifications not expressly approved by the manufacturer could void the

user’s authority to operate the equipment under FCC rules.

Cet appariel numerique de la classe B respecte toutes les Exigences du

Reglement sur le materiel brouilleur du Canada.

QUICK START GUIDE: Modular ARCs

Safety

What Ships in the Box

• A Modular ARC hardware device.

• A single-gang white Decora® wall plate

(as applicable).

• This Quick Start Guide.

What You Need to Provide

• A Windows PC with 1 GHz or higher

processor and:

• Windows XP or higher.

• 250 MB free storage space.

• 1024x768 graphics capability.

• 16-bit or higher colors.

• CD-ROM drive or Internet connection.

• 512 MB or more of RAM as required by

your operating system.

• Shielded twisted pair wire to connect

the Modular ARC’s RS-485 terminals to

the RS-485 port of a Symetrix hardware

device.

• CAT5 cables to connect any ARC to any

device with an RJ45 ARC port.

NOTE: Not all Modular ARC models are

supported by all Symetrix devices. Refer

to respective devices’ documentation for

details.

Getting Help

All Symetrix software, the Windows

applications that control all Symetrix

hardware, include a help module which

acts as a complete User’s Guide for both

hardware (including the Modular ARCs)

and software.

If you have questions beyond the scope

of the help module, contact our Customer

Support Group in the following ways:

Tel: +1.425.778.7728

8:00 am to 4:30 pm

Monday through Friday,

Pacific Time

Web: http://www.symetrix.co

Email:

[email protected]

1 2 3 4

Summary of Contents

Page 1 - Getting Help

1G The lightning ﬂash with arrowhead symbol within an equilateral triangle is intended to alert the user of the presence of uninsulated “dangerous vo

Page 2 - Getting Started

26408 216th Street SW | Mountlake Terrace, WA 98043 USAT +1.425.778.7728 F +1.425.778.7727 | www.symetrix.coQUICK START GUIDE: Modular ARCsGetting S

Page 3 - Installation / Network Design

Installation / Network DesignQUICK START GUIDE: Modular ARCs3ARC Distance TableThe following table provides at-a-glance cable length limitations based

Page 4 - Warranty and Service

Warranty and ServiceThe Symetrix Limited WarrantySymetrix, Inc. expressly warrants that the product will be free from defects in material and workmans

Comments to this Manuals

No comments

Symetrix Modular ARC User Manual

Browse online or download User Manual for Computer hardware Symetrix Modular ARC. Symetrix Modular ARC User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Computer hardware Symetrix Modular ARC